MYGOFLIGHT has quickly become the go to choice for pilots looking to mount their iPad and other electronics in the cockpit. MYGOFLIGHT has used their years of experience, proprietary technology, and the highest quality materials to develop the strongest and most versatile mounting solution on the market.
The Flex Suction has been designed to meet the needs of pilots and attaches securely to any glass windshield, side window, or other smooth surface.
Note: A MYGOFLIGHT Device Holder is required to use this mount. If you do not already own one you can add one to your order of this mount or Click Here to view all Device Holders.
20 g CERTIFIED
Flex Suction was tested to withstand a 20 g impact. To view the test results Click Here
Flex Suction can be installed by any pilot in any aircraft. Use the quick release suction cup to securily mount to glass or any other smooth surface.
Ball and socket ends and a ratcheting center provide infinite adjustment to height and position
Rotate device between landscape and portrait positions in-flight when mounted
This mount comes with a Gen 3 Sport Adapter which quickly connects to any MYGOFLIGHT device holder. Press both green buttons to remove.
MOUNT ANY DEVICE
From iPad to GoPro this mount can securely hold any device including iPad, iPhone, Android devices, Microsoft Surface, GoPro, Garmin GPS, and even more.
Flex Suction constructionThe arm is comprised of three independent joints, all adjustable and lockable from a single, centrally located, control knob The control knob joint is adjustable to 360° and the two end joints are mini-ball heads that are adjustable to 105° The suction cup attachment joint is a lockable socket which rotates 220° The control knob allows partial loosening for safe and precise device positioning No longer limited to fixed length, limited rotation RAM arms Takes all of the guess work out of mount size selection and problems of imprecise positioning
- Position and lock the suction cup to the glass or smooth surface, tighten the control knob. Be sure the glass or surface is clean, the base of the suction cup is clean, and the suction cup attachment socket runs vertically to assure hold and minimize vibration. Tighten the suction cup socket and control knob.
- Attach the Device Holder (Sold Seperately) with device to the Sport Adapter
- Loosen the control knob and the suction cup socket, position the device
- Fine tune device positioning, tighten control knob
About The Suction CupThis is a lift to lock suction cup mount with a multi-positional arm. Made of true rubber, the suction cup is designed for years of use. The lift to lock suction cup is easy to use. The suction cup holds strong to any glass, plastic or similar smooth surface and provides a rigid and firm platform for positioning and holding the device. Made out of a lightweight, high strength, composite material.
The Sport Mount - Flex Suction - an INFINITELY articulating and adjustable arm. There is no other suction cup mount for a device that does all that this unit does in a single, light-weight, easy to configure mount. This one mount can operate as a compact suction cup, allowing a close postion to the glass of 3.25 inches. It can operate as standard suction cup mount extending to 10.5" The Sport Mount - Flex Suction is for pilots who want to mount their device off a glass windshield, side window or other smooth surface. The Sport Mount - Flex Suction construction: The arm is comprised of three independent joints, all adjustable and lockable from a single, centrally located, control knob The control knob joint is adjustable to 360° and the two end joints are mini-ball heads that are adjustable to 105°. The suction cup attachment joint is a lockable socket which rotates 220° The control knob allows partial loosening for safe and precise device positioning No longer limited to fixed length, limited rotation RAM arms Takes all of the guess work out of mount size selection and problems of imprecise positioning The mount is portable and can easily fit in your flight bag or can be positioned and left on-board. Perfect for owners and renters alike
Flex Suction D...The Sport Mount - Flex Suction - an INFINITELY articulating an...
Posted by Glenn Williams on 30th May 2017
This is the standard flex mount suction. I was concerned that it may not have enough staying power. I was wrong - the standard suction stays on Plexiglas as if it were bolted on, even at the curved sections. It works great sitting just to the left and above the yoke at about a 45 degree angle in my Piper Cherokee. The one area I was thinking of that did not work was to use one of the $10.00 adhesive discs on a blank instrument circle on the instrument panel itself. But that will not work because the suction cup is bigger than the blank instrument gauge circle if that makes sense. The unit is well made and when you tighten the locks it is very rigid. A little pricey but you get what you pay for. I would buy it again.
Completely worth the dollar amount
Posted by Unknown on 23rd Jul 2016
I received this mount in the mail just in time for a 6 hour flight in a helicopter. I am flying a R-22 for instructional purpose and found this mount worked perfectly. The mount is strong and durable and I will never use my iPad without this mount again.
Sport Mount Suction Cup
Posted by Unknown on 15th Jan 2016
The product was exactly as advertised....solid construction and small enough to fit on either side of our 172 Cessna windscreen. Well made!
I love mygoflight!!!
Posted by Jason on 11th Dec 2014
I have an iPad mini and a iPad air both with "sport" cases and have two suction cups holders one is the flex mount sport the other is an older version that I can't remember the name of. I have had it for over a year and it still works great. It is so nice not to chase the iPad all over the cockpit. Also is nice to glance to my left and see where I am while taxing as I travel all over the country many times to airports I sm not familiar with.
In summary if you take any iPad in the cockpit you should have one of the many mygoflight products so that it is secured and always in the same spotting assist you when need it.
Sturdy, strong yet very adjustable
Posted by Nathan on 4th Nov 2014
This unit has some very high quality construction and once locked down it does not move or shake loose and I use this in a crop duster towing banners so we are very aggressive with our maneuvers and alot of vibration exists. The adjustablility of this unit is amazing. I can pretty much twist and configure my IPAD into any position necessary.
Posted by Jag on 28th Jul 2014
Does exactly what I needed and does it with little effort.