Site Information

 Loading... Please wait...

UltraThin iPad Panel Mount


Product Description

The UltraThin iPad Panel Mount is a new lightweight aircraft grade aluminum mounting system to easily dock and seamlessly integrate your Apple iPad into your aircraft instrument panel – giving it an elegant, professional appearance in an easy to view position! Once installed, the UltraThin iPad Panel Mount allows your iPad to be mounted in seconds, and fully connected to power and audio with built-in cable ports. Removal is just as easy - just slide the face plate off and remove the iPad. iPad can be mounted in portrait or landscape mode.



FAA Certified

Click Here to view the MYGOFLIGHT NORSEE letter of authorization




No large cutout required. Maintains integrity and strength of the panel. Fits in tight spaces - Zero protrusion behind the panel.

The UltraThin iPad Panel Mount is mounted on the surface of the panel using four screws for maximum security and reliability. It can also be mounted using the included VHB adhesive when the panel is a smooth, strong, non-papercoated surface. Unlike other products that require a large hole cutout in your panel this mount does not. Vent holes are recommended for keeping the iPad cool. Allow 24 hours cure time for VHB adhesive installation.


Future Proof. Upgrade to new iPad without the concern of an overcut hole or having to re-drill.

Patented design keeps the mounting holes in the same place forever (for same screen sized iPads). When you upgrade to a new iPad of the same screen size, future UltraThin iPad Panel Mounts will utilize the same hole configuration so you do not have to drill additional holes in your panel.


Keep Your iPad Cool

As they are being used, iPads generate heat that can affect performance – resulting in a high-temperature shut down when you might need it most. The UltraThin iPad Panel Mount was designed with cooling in mind. The open back of the UltraThin iPad Panel Mount allows you to create airflow to cool the iPad by cutting two small vent holes in the panel. The UltraThin iPad Panel Mount can be used with a 5/8" air hose connector, allowing you to attach it to a standard avionics cooling fan.


Keep The iPad Charged

The UltraThin iPad Panel Mount has a power cable slot that allows you to keep your iPad charged while mounted on the panel. The UltraThin iPad Panel Mount comes with a 90° lightning cable to keep the iPad charged.

We recommend using the RapidCharger Dual Micro 12-28v for in front of the panel power. Or if you are looking for behind the panel power we recommend using this USB Charger Multi-Port from Lonestar Aviation for only $149.95.


Works With ArmorGlas Anti-Glare Glass Screen Protectors

The UltraThin iPad Panel Mount was designed to accomadate the use of ArmorGlas. ArmorGlas eliminates glare and reflection without affecting the clarity of the screen. Light hits the etched surface of the ArmorGlas and is scattered, eliminating glare and mirror effects. When it comes to screen protection, nothing is better than the feel and clarity of pure glass. ArmorGlas is like having no screen protector on at all - you won't even realize it's there.



Simple To Install

surfaceinstructions1.jpg 1) Attach bracket to surface using four screws (not included). Alternatively you can attach the bracket using VHB adhesive tape (included). Make sure green power button is at the top left corner. surfaceinstructions2.jpg2) Insert iPad into bracket. Slide home button side in first. Home button should always be on the right side. surfaceinstructions3.jpg3) Slide front face plate onto bracket. Plate slides from top down. Make sure side with two speaker holes is on the right.  surfaceinstructions5.jpg4) Enjoy the elegant solution of the MYGOFLIGHT iPad UnltraThin Panel Mount.

Spacing text. iPad Panel Mount for aircraft panel.

*VFR use only. Installation in experimental aircraft authorized. Consult your local Flight Standards District Office (FSDO) and FAA AC-138 for recommended installation approval in certified aircraft.


Installation Manual

Click Here to view the installation manual


Other Details

iPad Mini Surface Mount Height: 10"
iPad Mini Surface Mount Width: 5 7/8"
iPad Mini Surface Mount Depth: 5/8"
iPad Mini Surface Mount Weight (Without iPad): 13.8oz
iPad Mini Surface Mount Weight (With iPad): 1lb, 9.3oz
iPad Air/Pro 9.7 Surface Mount Height: 11 3/4"
iPad Air/Pro 9.7 Surface Mount Width: 7 1/4"
iPad Air/Pro 9.7 Surface Mount Depth: 5/8"
iPad Air/Pro 9.7 Surface Mount Weight (Without iPad): 15.5oz
iPad Air/Pro 9.7 Surface Mount Weight (With iPad): 2lbs, 0.4oz

Product Reviews

Write Review

  1. Great for Aircraft and Boats too! 5 Star Review

    Posted by on 21st Apr 2017

    I fund this product at Sun & Fun 2017 and knew I had a winner! Although the real estate in my aircraft panel was already spoken for, I immediately recognized the potential for the new boat I recently purchased. I already had a 12" Garmin Chartplotter installed but wanted to fill the additional flat space on my boat electronics panel with an iPad. The iPad can drive weather to the Garmin, as well as provide a full data stream for things like additional charts and movies for the kids. Until that moment, I had not found anything online suitable for a clean flush installation of an iPad. The MYGOFLIGHT mount was really easy to install and has a reveal no deeper than my Garmin making it perfect on the boat. I wish I could post pics so the readers could see how awesome it looks. I placed a couple calls to MYGOFLGHT and was extremely satisfied with the customer service. The shipping was fast and the mount is built incredibly well as its all Aluminum. I am a very happy client!